Universal Zarcon

Universal Zarcon Fund

Outdoor - Indoor



Prevents rust



Anti-Corrosion Protection

APPLICATION

FUND ZARCÃO UNIVERSAL CIACOLLOR product indicated for application in ferrous metals in external and internal areas. It has a matte finish and is available in gray and orange.

This product follows the classification of standard NBR 11702 type 4.1.1.2.



SURFACE PREPARATION / INSTRUCTIONS FOR USE

Eliminate possible points of rust or any other impurity. Clean the surface with a dry cloth dipped in thinner or turpentine. Apply one coat of Zarcão Ciacollor. After drying the zarcão, apply the finish.

NOTE: in case of repainting, make sure that there is no shine on the surface and only then apply the Ciacollor Synthetic Enamel. If there is any shine, remove with suitable sandpaper. Failure to follow this process can lead to problems of low gloss and adhesion.



PRODUCT PREPARATION

As soon as you open the package, stir the product with a spatula / ruler or similar so that it becomes homogeneous.



DILUTION

10 to 20% with turpentine.
Before starting painting, stir the product again so that it reaches the ideal point for application and performance.



TOOLS

Roller, brush or pistol.


YIELD

900 mL packaging: 10 to 12 m² / coat
3.6 L gallon: 40 to 48 m² / coat
18 L can: 200 to 240 m² / coat

The yield may change according to the surface, tool used and experience of the applicator.



LAYERS

We recommend painting in 2 layers, respecting the time of 4 hours between layers.
Depending on the surface conditions, an additional layer may be required.


DRYING

2 hours to touch and 24 hours final. This time may vary according to the local climatic conditions at the time of application.