Premium Acrylic Paint

Premium Acrylic

Outdoor - Indoor



High Coverage



More Durability



Smelless*



Perfect Finish (Matte, Semi-Gloss and Max washable)

APPLICATION

PREMIUM CIACOLLOR ACRYLIC PAINT water based with high binding power, easy to apply that provides a low level of splash and excellent finish. Suitable for painting surfaces in internal and external areas such as: masonry, plaster, fiber cement, concrete and plaster. Available in finishes: Matte, Satin (Max Washable) and Semi Gloss. * No smell after 3 hours of application in a ventilated environment.

This product follows the classification of standard NBR 11702 type 4.5.1 (Matte) and type 4.5.4 (Satin and Semi Gloss).



SURFACE PREPARATION / INSTRUCTIONS FOR USE



General: every surface must be properly clean, porous and dry, free from dust or any other type of dirt. In the case of greasy or greased surfaces, first remove the dirt with water and detergent. On moldy surfaces, apply a solution of water and hypochlorite in the proportion of a part of water to a part of hypochlorite and rinse after 6 hours. Apply the paint after at least 24 hours of drying. Surfaces that have a shine should be sanded and cleaned before applying paint.

Weak plastering or whitewashing: remove loose parts, sand and apply the Ciacollor wall primer. In some cases it is necessary to use acrylic putty (exterior) or putty (interior) to correct the surface before applying the paint.

New plaster: wait at least 30 days for curing and use one coat of Ciacollor Acrylic Sealer. After this process, apply the paint.


NOTE: do not apply the product on damp surfaces. Treat the moisture problem before applying the paint. This product cannot be applied on enamelled, glazed, closed or non-porous surfaces.



PRODUCT PREPARATION



As soon as you open the package, stir the product with a spatula / ruler or similar so that it becomes homogeneous.



DILUTION



1st layer: dilute with 20% with clean water
2nd layer: dilute with 10% with clean water



TOOLS



Roll of soft wool, brush, pistol or soft bristle brush.



YIELD


900 mL container: 10 to 12 m² / coat

3.6L gallon: 40 to 50 m² / coat

18 L can: 200 to 250 m² / coat

The yield may change according to the surface, tool used and experience of the applicator.



LAYERS


We recommend painting in 2 layers, respecting the time of 4 hours between layers.
Depending on the surface conditions, an additional layer may be required.


DRYING



1 hour to touch 4 hours between coats 72 hours final. This time may vary according to the local climatic conditions at the time of application.