PVA sealer

PVA sealer

Outdoor - Indoor



Excellent Filling Power



Great Coverage

APPLICATION

SEALER PVA CIACOLLOR water based product indicated for application in masonry, plaster and plaster.

This product follows the classification of standard NBR 11702 type 4.1.2.5.



SURFACE PREPARATION / INSTRUCTIONS FOR USE

Every surface must be properly clean, porous and dry, free from dust or any other type of dirt. In the case of greasy or greased surfaces, first remove the dirt with water and detergent. On moldy surfaces, apply a solution of water and hypochlorite in the proportion of a part of water to a part of hypochlorite and rinse after 6 hours. Apply the PVA sealer after at least 24 hours of drying.



PRODUCT PREPARATION

As soon as you open the package, stir the product with a spatula / ruler or similar so that it becomes homogeneous.



DILUTION

10 to 20% with clean water.

Before starting the painting, stir the product again so that it reaches the ideal point for application and performance.



TOOLS

Roll of low-haired wool, brush, brush or pistol.



YIELD

3.6 L gallon: 30 to 40 m² / coat
18 L bucket: 150 to 200 m² / coat

The yield may change according to the surface, tool used and experience of the applicator.



LAYERS

We recommend painting in 1 layer. Respect the drying time of 4 hours for applying the finish.


DRYING

30 minutes to touch, 4 hours between coats and 6 hours final. This time may vary according to the local climatic conditions at the time of application.