Extreme - Premium Floors and Courts

Acrylic Premium Floors and Courts

Outdoor - Indoor



Excellent Resistance



Higher Yield



Non-slip (in Semi-Gloss finish)

APPLICATION

ACRYLIC PAINT PREMIUM CIACOLLOR FLOORS AND PLATES PAINT suitable for external and internal painting of cemented floors, sports courts, sidewalks, parking lots, among others. This product is available in matte and semi-gloss finishes.

This product follows the classification of standard NBR 11702 type 4.5.6.



SURFACE PREPARATION / INSTRUCTIONS FOR USE

General: every surface must be properly clean, porous and dry, free from dust or any other type of dirt. In the case of greasy or greased surfaces, first remove the dirt with water and detergent. On moldy surfaces, apply a solution of water and hypochlorite in the proportion of a part of water to a part of hypochlorite and rinse after 6 hours. Apply the paint after at least 24 hours of drying. Surfaces that have a shine should be sanded and cleaned before applying paint.

Attention: this product cannot be applied to enamelled, waxed, vitrified or non-porous surfaces.



PRODUCT PREPARATION

As soon as you open the package, stir the product with a spatula / ruler or similar so that it becomes homogeneous.



DILUTION

1st layer: dilute with 20% with clean water
2nd layer: dilute with 10% with clean water



TOOLS

Roll of soft wool, brush, pistol or soft bristle brush.



YIELD

900 mL container: 10 to 12 m² / coat

3.6L gallon: 40 to 50 m² / coat

18 L can: 200 to 250 m² / coat

The yield may change according to the surface, tool used and experience of the applicator.



LAYERS
We recommend painting in 2 layers, respecting the time of 4 hours between layers.
Depending on the surface conditions, an additional layer may be required.


DRYING

1 hour to touch 4 hours between coats 72 hours final. This time may vary according to the local climatic conditions at the time of application.