Performance Acrylic Paint - Standard

Standard Acrylic

Outdoor - Indoor



Great Finish



Low Odor



Excellent performance

APPLICATION

ACRYLIC PAINT STANDARD CIACOLLOR It is a paint suitable for external and internal painting of walls in general. Suitable for painting surfaces in internal and external areas such as: masonry, plaster, fiber cement, concrete and plaster.

This product follows the classification of standard NBR 11702 type 4.5.2 and NBR 15,079.



SURFACE PREPARATION / INSTRUCTIONS FOR USE

General: every surface must be properly clean, porous and dry, free from dust or any other type of dirt. In the case of greasy or greased surfaces, first remove the dirt with water and detergent. On moldy surfaces, apply a solution of water and hypochlorite in the proportion of a part of water to a part of hypochlorite and rinse after 6 hours. Apply the paint after at least 24 hours of drying. Surfaces that have a shine should be sanded and cleaned before applying paint.



Weak plastering or whitewashing: remove loose parts, sand and apply the Ciacollor wall primer. In some cases it is necessary to use acrylic putty (exterior) or putty (interior) to correct the surface before applying the paint.



New plaster: wait at least 30 days for curing and use one coat of Ciacollor Acrylic Sealer. After this process, apply the paint.



NOTE: do not apply the product on damp surfaces. Treat the moisture problem before applying the paint. This product cannot be applied on enamelled, glazed, closed or non-porous surfaces.



PRODUCT PREPARATION

As soon as you open the package, stir the product with a spatula / ruler or similar so that it becomes homogeneous.



DILUTION

1st layer: dilute with 20% with clean water
2nd layer: dilute with 10% with clean water
Before starting the painting, stir the product again so that it reaches the ideal point for application and performance.


TOOLS

Roll of soft wool, brush, pistol or soft bristle brush.



YIELD

3.6 L gallon: up to 60 m2 / coat

18 L: up to 300 m2 / coat

The yield may change according to the surface, tool used and experience of the applicator.



LAYERS

We recommend painting in 2 layers, respecting the time of 4 hours between layers.

Depending on the surface conditions, an additional layer may be required.


DRYING

1 hour to touch 4 hours between coats 72 hours final. This time may vary according to the local climatic conditions at the time of application.