Wall Preparing Fund (Solvent)

Solvent Based Wall Preparer Fund

Outdoor - Indoor



Promotes Greater Adherence to Final Painting



Prepares and smooths the surface

APPLICATION

CIACOLLOR WALL PREPARING FUND product suitable for application on new plaster surfaces, weak plaster, bricks, plaster, whitewash and concrete.

This product follows the classification of standard NBR 11702 type 4.1.1.5.



SURFACE PREPARATION / INSTRUCTIONS FOR USE

The surface must be firm (cohesive), clean, dry, without dust, grease or mold. Scrape or brush loose parts before application. In the case of greasy or greased surfaces, first remove the dirt with water and detergent. On moldy surfaces, apply a solution of water and hypochlorite in the proportion of a part of water to a part of hypochlorite and rinse after 6 hours. Apply the bottom after at least 24 hours of drying.

NOTE: do not use the product on enamelled, vitrified surfaces, with wax or, silicone or on burnt cement floors.



PRODUCT PREPARATION

As soon as you open the package, stir the product with a spatula / ruler or similar so that it becomes homogeneous.



DILUTION

Ready to use.



TOOLS

Roller, brush or pistol.


YIELD

900 mL packaging: 5 to 10 m² / coat
3.6 L gallon: 20 to 40 m² / coat
18 L can: 100 to 200 m² / coat

The yield may change according to the surface, tool used and experience of the applicator.



LAYERS

We recommend the application in 1 or 2 layers depending on the surface conditions, respecting the time of 6 hours between layers.


DRYING

10 minutes to touch, 6 hours between coats and 12 hours final. This time may vary according to the local climatic conditions at the time of application.