Water Repellent Silicone

Water Repellent Silicone

 Outdoor - Indoor  

Waterproofing  

Does not modify the surface  

 Prevents Mold

APPLICATION

HYDRORREPELENT SILICON CIACOLLOR
 is a water repellent, water repellent, preventing water from penetrating the surfaces. It is indicated to protect surfaces such as: exposed brick, ceramic tiles, natural stones, porous ceramic and exposed concrete. It can also be used in grouts to prevent stains and browning. Colorless product, does not shine and does not change the color of the applied surface. This product follows ABNT NBR 4.8.2 standard.

SURFACE PREPARATION / INSTRUCTIONS FOR USE
The surface must be firm (cohesive), clean, dry, without dust, grease or mold. Eliminate any kind of shine, using suitable sandpaper. Scrape or brush loose parts before application.

 PRODUCT PREPARATION
 As soon as you open the package, stir the product with a spatula / ruler or similar so that it becomes homogeneous.

DILUTION
 Ready-to-use product.

TOOLS
Compressor, brush, wool or foam roller and brush.

YIELD
Yield                              surfaces
                                        3.6 L                 18 L
          Large porosity 4 to 7m² 20 to 35m²
 Average porosity 10 to 14m² 50 to 70m²
    Small porosity 18 to 30m² 90 to 150m²
 The indicated yield refers to the average yield of the product. There may be variation depending on the experience of the applicator, climatic conditions at the time of application and the porosity of the surface as described above

LAYERS
Apply the product in 1 well-charged coat. For a more effective result the product can be applied in 2 coats, being damp on damp. Do not apply the product on rainy days or with air humidity above 90% and at temperatures below 10ºC. These weather conditions can impair the curing of the product and consequently the expected final result

DRYING
8 hours after application.