Tinta Econômica Profissional

Professional Economic Acrylic Paint  

Professional Economy
 Interior

 Easy Application

  Great Coverage

   Anti mold

APPLICATION

PRODUCT: ACRYLIC INK ECONOMIC PROFESSIONAL FOSCO - CIACOLLOR

   It is an easy-to-apply water-based matte acrylic paint that provides a low level of splash and offers a good finish. Suitable for painting masonry surfaces in indoor areas. This product follows the classification of standard NBR 11702 type 4.5.3.

  SURFACE PREPARATION / INSTRUCTIONS FOR USE
 General: every surface must be properly clean, porous and dry, free from dust or any other type of dirt. In the case of greasy or greased surfaces, first remove the dirt with water and detergent. On moldy surfaces, apply a solution of water and hypochlorite in the proportion of a part of water to a part of hypochlorite and rinse after 6 hours. Apply the paint after at least 24 hours of drying. Surfaces that have a shine should be sanded and cleaned before applying paint.
Weak plastering or whitewashing: remove loose parts, sand and apply the Ciacollor wall primer. In some cases it is necessary to use acrylic putty (exterior) or putty (interior) to correct the surface before applying the paint.
 New plaster: wait at least 30 days for curing and use one coat of Ciacollor Acrylic Sealer. After this process, apply the paint.

 NOTE: do not apply the product on damp surfaces. Treat the moisture problem before applying the paint. This product cannot be applied on enamelled, glazed, closed or non-porous surfaces.

PRODUCT PREPARATION
As soon as you open the package, stir the product with a spatula / ruler or similar so that it becomes homogeneous. DILUTION
 1st layer: dilute with 10% to 20% with clean water
2nd layer: dilute with 10% to 20% with clean water
Before starting the painting, stir the product again so that it reaches the ideal point for application and performance.

  TOOLS
 Roller, brush and pistol.

  LAYERS
 We recommend painting in 2 layers, respecting the time of 4 hours between layers. Depending on the surface conditions, an additional layer may be required.
 
YIELD
 3.6 L gallon: 30 to 40 m² / coat 16 L: 135 to 175 m² / coat The yield may change according to the surface, tool used and experience of the applicator.

 DRYING
1 hour to touch, 4 hours between coats and 72 hours final. This time may vary according to the local climatic conditions at the time of application.
 
COMPOSITION
 Acrylic copolymers, inert mineral fillers, organic and inorganic pigments.

 RECOMMENDATIONS
 Keep the product out of the reach of children and animals. Do not ingest or inhale vapors. Avoid contact with skin and eyes. In case of skin contact, seek medical attention.