Acrylic Sealer Plus

Acrylic Sealer Plus

Outdoor - Indoor
   
Filling Power

  Good Coverage

   

APPLICATION

ACRYLIC SEALER PLUS CIACOLLOR
 product is indicated for sealing masonry surfaces reducing absorption in internal and external areas. This product follows the classification of standard NBR 11702 type 4.1.2.5  

SURFACE PREPARATION / INSTRUCTIONS FOR USE  
General: every surface must be properly clean, porous and dry, free from dust or any other type of dirt. In the case of greasy or greased surfaces, first remove the dirt with water and detergent. On moldy surfaces, apply a solution of water and hypochlorite in the proportion of a part of water to a part of hypochlorite and rinse after 6 hours. Apply the paint after at least 24 hours of drying. Surfaces that have a shine should be sanded and cleaned before applying paint. New plaster: wait at least 30 days for curing and use one coat of Primer Ciacollor. After drying, apply the desired coating.  

PRODUCT PREPARATION
 As soon as you open the package, stir the product with a spatula / ruler or similar so that it becomes homogeneous.  

DILUTION  
Up to 10% with clean water. Before starting painting, stir the product again so that it reaches the ideal point for application and performance.  
TOOLS
 Roll of low-haired wool, brush, brush or pistol.  

 YIELD
  3.6 L gallon: 20 to 30 m² / coat
 18 L can: 100 to 150 m² / coat
 20 Kg barrel: 85 to 125 m² / coat
 The yield may change according to the surface, tool used and experience of the applicator.

   LAYERS
 We recommend application in 1 layer. If necessary a second layer, respect the time of 4 hours between layers.

 DRYING
  30 minutes to touch, 4 hours between coats and 6 hours final. This time may vary according to the local climatic conditions at the time of application.